Blog

Updated

1. Download ASR Pro

2. Run the program

3. Click "Scan Now" to find and remove any viruses on your computer

Speed up your computer today with this simple download.

If you’ve noticed the settings for external video cards in the BIOS, this guide might help.

Open the BIOS menu.Use the Direction Left / Right buttons to select the Advanced tab.Use the up / down arrows to select the Video Adjust option.Select the PCI-Express Graphics option and press Enter.Press “F10” to save the new settings.

The critical I / O system determines how the hardware performs in the new system; Administrators can access the BIOS to change the configuration of the computer, and to remove or activate certain peripherals or peripherals. Onboard peripherals are integrated into the motherboard; Many modern computers have a built-in visual chip, so the computer can transfer video at a lower cost. For some companies, an integrated graphics chip is not enough due to its limitations. Installing a graphics card in an expansion slot can improve the graphics quality required for business presentations for clients and professionals. However, installing a card can cause problems with the built-in card. Disabling the built-in display avoids these conflicts.

Restart or move your computer. Look for the message on the loading screensuch as Press F8 to enter Setup or BIOS Setup: F8. The function key differs depending on the motherboard manufacturer.

Follow the instructions on the screen to enter the BIOS. When the laptop boots into Windows, press “Ctrl-Alt-Del”, restart your computer and try entering BIOS again.

Use the arrow keys to select from the Advanced menu, Advanced BIOS features, or similar option. Press Enter. “

Select Northbridge Configuration, Video Configuration, Graphics, Internal, or similar from the submenu, if available. Hit Enter.

Look for an option such as Primary Video Controller, Primary Video Adapter, or Launch Graphics. Press Enter. “

Select “GFX0” or “PEG” to change the explanatory card to connect peripheral components, “PCI” to replace the card with PCI, “AGP” to replace the high acceleration graphics card, or “GPP” to put on multiple video cards.

Press “Enter” to change the graphics settings. Press F10 and press E againnter “to disable the on-board graphics.

Ruri Has ranbe has been a writer since 2008. She holds an AA in English Literature from Valencia College and a Bachelor of Science in Computer Science from the University of Central Florida. Ranbe also has over six years of professional experience in information technology, with a focus on computer architecture, operating systems, networking, forum management, virtualization, and web design.

• Pressing “+” or “-” to change the fantastic setting when pressing Enter does not work.
• BIOS differs depending on the make and model of your computer circuitry or motherboard. If your business needs more help, refer to the documentation that usually comes with your computer or hardware.

Presentation

Many computers have two video cards: built-in and dedicated. FARO ^® computers may experience graphical display issues if the on-board card is explicitly enabled / disabled, as shown below.

For Cam2 2018.1 and shortly thereafter, both video cards should be on at all times.

For all other FARO software, disable the onboard Intel card and enable the NVIDIA graphics card. Windows

In version 10, you can access this Device Manager by opening Control Panel, clicking System and Security> System and using Device Manager on the left side of the window.

There are two ways to configure your computer to use multiple video cards.

1. Enter the current video card at BIOS level. The correct map is available after starting the computer.
   OR
2. Install a popular graphics card in the graphics card management area.

Install The System Video Card In BIOS

CAM2 users: Disabling the gift card with an integrated graphics card may cause problems with CAM2 2018.1 when combined with later versions.

HP Notebook PCs

Some HP notebook computers have different BIOS menus. Use the appropriate method below to change your graphics card settings.

Disable Hybrid(G5)

(g4 and
1. Restart your computer and hold down the Esc key. (Note: the Start Boot menu tries to appear in the lower left corner of most of the screen)
2. From the Start menu, press the F10 key to enter BIOS setup.
3. Click Advanced.
4. Select options for embedded devices.
5. Select Graphics, then Discrete Graphics.
6. Click “Save”, when prompted, click “Save Fluctuations” and exit BIOS.

Dell Laptops:

1. Restart your computer.
2. With the logo of the running system, press the F12 key to get the system BIOS.
3. Select a BIOS setting.
4. On this BIOS screen, expand the video group.
5. Select toggle graphics.
6. Uncheck the Enable Graphics Switching box on the appropriate side of the screen.
   
7. Select Apply to Plantar Surface on the right.
8. In the lower right corner, select Log Out.

Boot Into Windows 10,BIOS

If you are having problems accessing BIOS when booting your computer, you can use this method to access BIOS settings, including Windows 10.

1. Click this start menu.
2. Click Settings.
   
3. Click Update & Security.
4. Click “Restore”.
5. In the Advanced Startup section, click Restart Now.
   
6. Click Troubleshoot.
7. Click Advanced Options.
8. Click “UEFI Firmware Settings”.
9. Click restart.

Define The Map Graphics In The Current Map Graphics Control Panel

For the purposes most often associated with the examples, we will use an NVIDIA graphics card. Change the name of your graphics card when using a different graphics account. You may need to search the Internet for training systems for your video cards. Contact your computer manufacturer for additionalSee more information about disabling the integrated graphics card if you are not using an NVIDIA graphics card.

1. Right-click on the desktop theme and select NVIDIA Control Panel.
2. On the left, select Unwanted 3D> Settings Manage 3D Settings.
   Select
   • from the Global Settings drop-down menu, then select 3D Application – Game Development.
   • From the Preferred GPU drop-down menu, select High Performance NVIDIA Processor.
     
3. On the left, select 3D Preset> PhysX Configuration.
   • From the “Select PhysX one” dropdown menu select your graphics card (should not install “Auto Select” and / or possibly “CPU”).
     

See Also

• Problems with video / graphics card or Microsoft DirectX with Measure program
• Optimal graphics settings in Measure Q
• Problems with another manufacturer’s video / video card or video cardhigh end using SCENE.

invisible geometry, display, video card issues, TV card issues, lack of features, CAD display, nvidia, two video cards, two video cards, multiple video cards, multiple video cards, 2 video cards, 2 video cards, 10, direct return button, d3dx9_41.dll DLL error

Speed up your computer today with this simple download.