Table of Contents
Recently, some readers have encountered an error code with Wireless Event ID 4202. This issue can occur for several reasons. Let’s look at them now.
Updated
g.Event ID 4202. The detected system was disconnected from the network and the user’s adapter’s network configuration was published. If the network adapter is not disconnected, it could indicate a problem again. Contact your dealer for updated drivers.
g.
Yes. Mister. Please try to solve an issue where some wireless computers (industrial brand machines lxe vx5 – windows xp with sp2) correlate with crashes of foxpro applications at random intervals. The current wireless card system in industrial lxe vx5 devices is a Cisco Aironet 350 series slot, the driver version of the air-LMC350 model is 7.29.00 Firmware is 5.02.19
1. Microsoft Event ID logged 4201 in the system pane of some event viewers.
The system recognizing the multilayer adapter DEVICE TCPIP_3D669273-D938-40E2-B943-2D6E6E1BFEEA joined the communication and started normal operation through its network adapter.
2. Microsoft Event 4202 ID signed on the system side of the Incident Viewer. This particular error coincides with the loss of connection with the applicationeat Foxpro.
The routine detected that the adapter DEVICE TCPIP_3D669273-D938-40E2-B943-2D6E6E1BFEEA was disconnected from the network and some of the adapter’s network configuration was released.
If you find that the adapter network has not been disconnected, this may indicate a problem. Please set up your dealer for updated drivers.
Signal strength and peak quality are always within acceptable specifications.
First of all, I want to say that this is usually a delicate and elusive problem that started in isolation and was later discovered in a car left here at home.
First of all, ask me to give you a big picture:
I have 2 computers in my room, one of which might be a year old AMD Athlon XP 2000+ desktop PC on an ASUS A7S333 motherboard, 512MB RAM, the new Encore ENLWI-G2 PCI wireless adapter (Realtek 8185 chipset) or nVidia Geforce MX440. be with 64 MB.
The other is the one-year-old Acer Aspire 5606WL laptop with Intel Centrino Duo and Intel PRO wireless chipset. Computer
both run Windows XP SP2 and connect to the Internet via a wireless network.
Between nthey are a WLAN router, a nice TP-Link TL-WR642G. Working with Wan IP dynamic cable modem.
Scene actors, let’s try the drama.
I bought a WiFi router (for the whole house, anywhere from five to six computers) and Encore plugs to get rid of those nasty transparent cables running all over the place. All installations were successful. No problem with unsigned Realtek drivers on desktop. Also, there is no problem setting up an extreme connection to the router and setting everything up with the correct signal and channel, setting up WEP security and buying IP addresses for specific MAC addresses on the internal network, and enabling UPnP.
Everyone was connected and happy, whether over LAN or Wi-Fi.
A day later, I decided to use Azureus in my desktop program. The program worked fine, as did the connection, until the computer stopped moving and the wireless connection to the website was lost. Really and gone, “Update” in the available network window did nothing. When I tried to “fix” the connection, the system froze with a nice red lineher over my monitor!
However, after a hard reset, everything returned to normal. The connection was again, apparently without problems. But every time I buy Azureus or a plugin i.e. DownThemAll, the connection works the same as the first time.
A day later, the same erratic behavior occurred with my laptop under the same conditions (with Azureus), except for the coincidence of the red bar.
What I noticed:
In some cases, using the desktop: event viewer, I noticed that two tcpip events were already running. First 4226, EventID too many multiple connections and EventID 4202, single device.
On this laptop: also use the Event Viewer, Tcpip Event ID 4202.
What I’ve already done:
Update the Encore Wireless Adapter and Realtek 8185 Chipset Driver to their newer digitally signed version on the company’s website;
Updating the modem’s firmware to the latest version, which is available on some of the company’s websites;
Conduct the test step by step on specific computers connected to the router. This behavior is not repeated for these computers.
TCPIP.SYS has been fixed to handle EventID 4226.
None of the above helped ….
At the moment I am waiting for 4 days, because the response from the technical support of the agencies and can not properly browse the web. : sigh:
PS If it makes sense, both variants of computers have their own IP addresses, reserved through their DHCP server in the router.
Resume
This rule generates an alert when Windows® detects that all network adapters have been disconnected from our own network and that there is no connection to the mobile operator.
If there is only one vendor adapter on the computer, this warning will not appear until the connection to the group is restored. In the meantime, you can clear the warning without further action.
If multiple method adapters are installed on a computer, a warning may appear shortly before network connectivity is restored for the affected adapter functionality. However, regardless of another adapter, or possibly an adapter, remote clients and utilities may still have difficulty accessing resources due toconnected to the computer. In addition, the local computer may not have access to some system resources on the network.
Reasons
The adapter may lose network connectivity if you disconnect the web cable from the network adapter or assume that you are switching between wireless access points using your mobile system. Other possible causes are network problems, firewall problems, or other malfunctions of the network card or its own driver.
Permissions
If you want your computer to be connected to one of our networks, make sure the collection is connected correctly. If you already have a wireless network connection, make sure you and your family have a signal and are allowed to use the wireless network.
If the network port is working properly, check for the following possible causes and take corrective action:
-
The network has crashed many times.
-
Your computer’s firewall is blocking network traffic.
-
Your computer’s network card driver is also not working correctly.
Doptional
This rule generated an alert when one of the related events occurred and was logged in the event log of my system:
The system has detected that cellular network adapter% 2 has been disabled and the network configuration of the adapter has been released. If the network card is far from disconnected, it could indicate that it is healthy and defective. Please contact your dealer for the latest drivers.
Source: TCPIP; Event ID: 4201 The procedure determined that NIC% 2 has been disconnected from the network and the adapter’s cellular network configuration has been published. If the system’s network adapter is not disconnected, it could indicate a malfunction. Contact your dealer for updated drivers.
Updated
Are you tired of your computer running slow? Annoyed by frustrating error messages? ASR Pro is the solution for you! Our recommended tool will quickly diagnose and repair Windows issues while dramatically increasing system performance. So don't wait any longer, download ASR Pro today!
The following in the system event log indicates that our network card has resumed normal operation and connectivity.
The system has detected that the network adapter% 2 is connected to the network and functions have started normal operation via the system network adapter.
Source: TCPIP; Event ID: 4202 The system has detected thatThe network adapter% 2 was connected for network support, and the network adapter began to function normally.
External
For more information, see Microsoft Knowledge Article: Base 325487, How to troubleshoot network connectivity issues directly, at http://go.microsoft.com/fwlink/?LinkId=28867.
Speed up your computer today with this simple download.Risolto: Come Correggere L’ID Evento Wireless 4202
Fixo: Como Consertar A Identificação De Evento Wireless 4202
Исправлено: как исправить идентификатор беспроводного события 4202
수정됨: 무선 이벤트 ID 4202를 수정하는 방법
Naprawiono: Jak Naprawić Identyfikator Zdarzenia Bezprzewodowego 4202
Corregido: Cómo Arreglar El ID De Evento Inalámbrico 4202
Behoben: So Beheben Sie Die Drahtlose Ereignis-ID 4202
Corrigé : Comment Corriger L’ID D’événement Sans Fil 4202
Opgelost: Hoe Draadloze Gebeurtenis-ID 4202 Te Repareren?
Fixat: Hur Man Fixar Trådlös Händelse-id 4202
