Table of Contents
Updated
Over the past few weeks, several of our readers have told us they have encountered troubleshooting plug and play setup issues.
You will not have permission to access “http://www.dell.com/community/Desktops-General-Read-Only/Plug-and-Play-Configuration-Error/td-p/1425164” on that particular server.NextPreviousCONTENT
9. Error Messages
9.1 Abort
This means that there may be an interruption that no pilot expected.It is unlikely that this material accidentally interrupted him. Heit is more likely that there is a real miner in the software and the error does not recognize itsome software tool did something to trigger an interrupt. In many cases, you haveyou can safely ignore my post, error, especially if it happens only onceonce or twice at startup. For start times when viewing messages, seeSee related messages to indicate what might be going on. TOFor example, if sound is indeed coming, it is possible that the sound is passing through a physical device.makes the device generate a great interrupt that the driver does not havewait. The pilot may not have been listening to the correct IRQNumber.
9.2 Plug-Play And Configuration Errors (Dell BIOS)
BIOS failed to configurel tire resource. It can becomeInterrupt unavoidable conflicts. Dell offers youDraw a few nonessential cards and see if they work. VIn one case, it was a fee for a faulty motherboard.
9.3 Isapnp Entry: Data Register 0xa79 Is Already In Use (from Logs)
If the public uses isa-pnp, I / O addresses 0xa79 should never be usedany tool. So others, if the hardware is running at 0xa79 when you try to bootisa-pnp module, you will get this message in your current logs andisa-pnp will be terminated. One way to fix this problem is to download isa-pnpModify before loading other great hardware. For PCMCIA it ismeans isa-pnp will be loaded before starting web design service and cb.
Status
9.4 (PCI) Cannot Be Assigned
Here “region” means a range of addresses. PCI device that requires twoAddresses have a range of 0 for the first address and Arena 1 fora second address is required. Use the command: lspci -vv to see these differentRegions only d My resources (often called regions) with an addressis of type IO, otherwise memory. In PCI jargon, one or two is “base 2.”(or refer to “Basic Address Book 2”), etc.