Table of Contents
You should read these recovery methods when you get a vtp error.
Updated
VTP (VLAN Trunking Protocol) is a Cisco proprietary design used by Cisco switches to exchange VLAN information. By using VTP, you will of course synchronize VLAN information (such as VLAN ID or VLAN name) with clicks in the same VTP domain. Currently, VTP only allows VLANs to be created on one switch.
VTP
Basic Operations
At a critical moment, think about what needs to happen on another small four-switch network when your company adds two new hosts and redeploys those hosts to a VLAN that didn’t exist before. On fig. Figure 5-1 shows some key learning principles.
What is a VTP in networking?
VLAN Trunking Protocol (VTP) is a Cisco personal protocol that extends the definition of virtual local area networks (VLANs) to an entire local area network. To do this, the VTP forwards the VLAN specifics to all switches in the other VTP domain. VTP advertisements can be sent over 802.1Q and ISL trunks.
VTP Connectivity Troubleshooting
After connecting the switches with crossover cables, you have configured multiple VLANs on your network, although they are likely to run out. bright green on all of them… again; You can still get an error when the VTP configuration on the switches is almost certainly wrong.
What Fixes The Problem?
In vtp, we learned most of the previous section about the VLAN value locally and switches are configured manually. Well, if you think about it for a moment, it’s definitely a huge scaling limitation. Imagine you have over 100 switches on your network and you want to deploy a new VLAN. Someone has to report each device and follow the instructions. This is a slow and inconsequential proa process subject to human error. The VLAN Trunking Protocol (VTP) was introduced to solve this scaling issue.
VTP Troubleshooting
You connect your cliques with crossover cables that glowGo green at both ends and you’re up and running! Yes, in a perfect worldRight? Wouldn’t the public wish things were that simple? Well anytime a lotwithout VLAN, classes. But if you are using VLANs, you should definitely do so.Then you need to invest in VTP if you have multiple VLANs configured viaSwitched Network.VTP
5- Reduction
The main end goal of VTP reduction is to reduce excessive broadcast traffic on backbones. The idea is based on the fact that manually authorizing a VLAN on a backbone does not necessarily mean that it will always be the newest device on the link and listening on that VLAN.
How do I verify VTP?
The command to check the VTP operation should be of the form vtp status, as shown in example 3.1 on SwitchA. It looks like SwitchA is in a standard (unchanged) VTP configuration. The required configuration items (highlighted) are: VTP version / VTP V2 mode: By default, the Cisco buttons start VTP version 1.
VTP And STP (Logical Spanning Tree Port)
If you have a large domain, vtp is also the best STP domain. VLAN 1 must cover the entire VTP domain. Therefore, for this VLAN in the entire domain, onlyto one STP.
Speed up your computer today with this simple download.Error Vtp
Ошибка ВТП
Erreur VTP
Vtp-fel
Erro De Vtp
Błąd VPN
Vtp-fout
Vtp-Fehler
Errore VTP
VTP 오류