Table of Contents
Updated
Sometimes your system may display the xt error message. This problem can be caused by a number of reasons.
If ssh can establish a partnership, DISPLAY is set to recommendedvalue. Since you have set X11DisplayOffset to the default (value) 10, ssh takes advantage of the first available display of 10. If you see a value compared to a value less than 10¹, then something is interfering with Normal X11 redirection. the configured ssh at least overrides DISPLAY . The value is : 0 (or : 0.0 , the part immediately after the dot is irrelevant) the display initially started on the PC, which in Typical cases shows an activated session (or a graphical prompt to enter system) directly on the computer console.
The most likely explanation for any new behavior you see is that some of your shell configuration files identify DISPLAY . The most obvious culprit is the ~ / .bashrc Due (which, due to the nature of bash, should always be done when the parent bash is usually rshd or sshd even if the attachment is not interactive). Another file describing environment variables is / etc / environment . If possible, the decision is obvious: do not mouthpour DISPLAY for it. (There are only a few types that require manual DISPLAY definition.)
There may be other exotic explanations. This might be the case if you changed your login shell to be able to screen (good theory, but also impractical) and you have an initialization output file that forces DISPLAY <. puts / code> on the screen (not such a good idea). This can also happen if you have configured all server receive environment variables that were sent because of the client ( AcceptEnv directive in sshd_config ), the main client sends DISPLAY < / code> and the X connection could not be established. Or it may be that you have configured an adaptable environment on the server using the command directive in ~ / .ssh / authorized_keys . Or xterm can be a huge script.
¹ Or any other value added to X11DisplayOffset is in the server configuration, and outstanding jobs almost never change it.
You need to enable X11 forwarding in someone's SSH client (Putty), and also implement X11 forstart it up on the local computer. The computer name in the DISPLAY variable is far from the local machine, but has a multiplier of : 10 (local connection (from our point of view, an isolated machine)).
You must have X11 on a specific machine. If you only have a text box, no windows, sometimes there is no clear graphics, colors, then do not start X11, you can check this with the ps command.
We can never tell from the version if the next version has X11. But don't worry. Ubuntu and Debian have many variations (steeldriver coined the word "version" to describe this. This is correct, but ambiguous). Each option changes only the standard software. Thus, it is possible to adapt the variant by installing additional software.
With this icespiker in mind, you can add a minimal X11 by typing this in the limit command field: sudo apt-get install xorg .
You might want to use gnome, kde, fvwm, or perhaps some other windowing system to run better X11.
There is glass hanging on the image This is the Cygwin terminal window. This is similar to the Windows command line: the photo cannot be displayed. To use xterms, you must use the Cygwin X11 server component, also known as Cygwin-X.
You are obviously using the normal X11 connection method, which results in a secure, unencrypted X11 connection: anyone on the same network can spy on your keyboard and take action. But if you do have to use it, here's a diagnosis.
If you are planning to use Cygwin-X for Vista for the first time, it is likely that the Windows firewall or firewall component of your main Windows security solution is reporting that Cygwin-X is trying to act as a network server. Port 6000. For unencrypted X11 connections to work, you must enable this.
If Cygwin-X (or any other X server) is running on your PC as a whole, you must have a place to access it from the HP-UX engine via Telnet to port
telnet 192.165.15.3 6000
This connection does not actually trigger a meaningful request. but still, if the telnet command says “connection established” (or the correspondingText for locale / language), an unencrypted X11 connection is often possible.
However, instead of Cygwin-X, I would suggest Xming as it is easier to start and works well with PuTTY's X11 transfer job (assuming you are using SSH login policy and not telnet or rlogin).
The latest free Xming Xming fonts and packages are available at Sourceforge:
These are the usual self-extracting Windows Installer packages; Just set them up using standard views. Xming first, then Xming fonts. Start
then Xming; The program will add its icon to the notification area in the lower right corner of the screen. You have nothing else to use with.
Updated
Are you tired of your computer running slow? Annoyed by frustrating error messages? ASR Pro is the solution for you! Our recommended tool will quickly diagnose and repair Windows issues while dramatically increasing system performance. So don't wait any longer, download ASR Pro today!
Then start PuTTY. Once you have a session, select the preconfigured items and click Download. If you don't have one, just enter the hostname or IP address from the HP-UX field in the locale field of the PuTTY configuration dialog. But don't hit Enter yet, or just hit Login / Open recently!
Before connecting, navigate to -> Contact SSH -> X11 in the PuTTY design dialog and check the box next to Enable X11 Forwarding. You can stayLeave the "X-List Location" field empty. (If you want to keep your connection settings in this step with a meaningful name, including "
The first time you connect using X11 forwarding, you may see a target indicating that sshd has been created. I would say the $ HOME / .Xauthority file on the HP-UX case. If I say the file already exists, you won't see all of these messages (this is just a hint anyway).
If someone's sshd daemon on HP-UX has been configured to allow X11 forwarding, their DISPLAY should always have a weird value, like 127.0.0.1:10.0 for many. Leave the following unchanged: The value is set automatically via sshd and is required for SSH X11 forwarding. Since sshd also had to create Authority x keys for your company, you don't need any "xhost +" requirements.
Now, if you do something like "xterm &" in a PuTTY window, you actually get an xterm window on someone's Windows display. You can run all X11 applications the same way. When you disconnect someone in the PuTTY window, PuTTY is smart enough to wait for X11 applications to finish before closing the connection. but e If you forcefully close PuTTY, all running windows of remote X11 applications can also be forcefully closed.
If you set your PuTTY connection parameters, reconnection is certainly very easy:
- Make sure Xming is running.
- start PuTTY
- select the saved connection settings and click Connect (or Open, in some PuTTY variants)
Speed up your computer today with this simple download.
Como Faço Para Resolver O Erro Xt?
Как устранить ошибку Xt?
Come Risolvo L'errore Xt?
Hoe Los Ik De Xt-fout Op?
Xt 오류를 어떻게 해결합니까?
Comment Résoudre L'erreur Xt ?
¿Cómo Resuelvo El Error Xt?
Wie Behebe Ich Den Xt-Fehler?
