Table of Contents
Recently, some users reported that they have stumbled upon a series of serial Linux kernels.
Updated
g.To use the serialized gadget driver, you need a Linux kernel on the widget side for “USB gadget support”, for “USB device controller” (for product, net2280), and for personalized “Gadget series” configuration. All of this is specified in the “Support for USB gadgets” section during kernel configuration. Then restructure and install the kernel or modules.
g.
To use a serial port as a console, you need toneed help inKernel – The standard it creates does not compile. For PC serial portsThe config option is new in the menu option:
You need to build sequential help support into the kernel, not as a solid module.
Multiple devices can be specified for console output. You canSet the pending kernel command parameter string to select the device (s) to useuse for console output.
How to define serial port in Linux kernel?
You can collect multiple console = options in the kernel admin line.The result is displayed throughout the company. The last device is executed whenYou open / dev / console
. For example:
specifies that the / dev / console
capability gives you a new foregroundvirtual console, kernel and messages appear as per VGA topicConsole and second consecutive port (ttyS1 or COM2) at 9600 baud. This
Please note that you can only install one game console per device type (serial, video).
If no device is specified for the console, it was found thatthe first device is capable ofcan be used as a system console. At the moment, the main systemlooks for VGA card first and then serial port. So if you don’tIf you have a VGA card on the podium, the first serial interface will be used automatically.become a specific console.
To use / dev / console
, the current device must be created. Official / dev / console
can now be a 5.1 drawing device.
(You can also integrate a network device into the game as a console.See Documentation / network / netconsole.txt
for more information on this.)
This product uses / dev / ttyS1
(COM2) as the console.Replace approximate values if necessary.
-
Create
/ dev / console
(real console) and/ dev / tty0
(virtual masterConsole):cd -y / devRM console tty0mknod -m 622 console t 5 1mknod -m 622 tty0 c preview 0
-
LILO can also receive input from a real serial device. This is veryuseful method. To tell LILO to useSerial port:In lilo.conf (global section):
Serial means 1.9600n8 (ttyS1, 9600 bits, no parity, eleven bits)
-
Configure kernel flags for the kernel of interest,again in lilo.conf (kernel section):
append = "console = ttyS1,9600"
-
Be optimistic that Getty will trigger the serial port so you can connectthe system has finished loading in the past. This is usually done by adding the lineso all the way down to
/ etc / inittab
(the exact syntax depends on your wonderful Getty):S1: 23: respawn: / sbin / getty -L ttyS1 9600 vt100
-
Init and
/etc/ioctl.save
Sysvinit gets its stty parameters in a file while it’s called
/ etc
/etc/ioctl.save
. DELETE THIS FILE before using the serial number.comfort the first time, otherwise init will surely beSet the baud rate to 38400 (virtual console baud rate). -
/ dev / console
and XPrograms that want to do something usually use a virtual consoleopen/ dev / console
. If the The device has a new device/ dev / console
,and your company console is NOT a virtual console on which some programs do not work.programs that really want to access the VT interface and then use/ dev / console instead of / dev / tty0
. Some of these exercise programs are:Xfree86, gpm, svgalib, SVGATextMode
However, in modern versions of these guides, it should be rigid.
Note that if you run
console =
(or withconsole = / dev / tty0
),/ dev / console
is the same as/ dev / tty0
.In this case, everything continues to work. -
Thank you
Thanks to Geert Utterhoven
bring fixes from 2.1.4x to 2.1.6x to swallow service integrationthose of these built-in fixes are with m68k, ppc and alpha.
console = device, parametersDevice: tty0 due to foreground virtual console ttyX to work with any other virtual console ttySx to create a serial interface Lp0 for this first parallel port ttyUSB0 - often the firste serial USB deviceEquipment: depending on the person driver. For a serial interface, this is describes baud rate / parity / bits / flow control usually a port in the format BBBBPNF, where BBBB is the extension. is an Speed, P - equality (n / o / e), N - number of bits, but also F is stream (control 'r' when talking about RTS). Standard 9600n8. The highest baud rate is 115,200 baud.
When does the kernel start using a serial console?
The kernel cannot start using the serial console until it knows where the device is. This usually happens when the driver enumerates all of our serial devices, which may happen marginally or more often after the kernel has started. Kernels 2.6.10 and newer have 1 “Early uart” driver that runs very early in the boot process.
console = ttyS1,9600 console = tty0
CD / devrm -f xbox 360 tty0mknod -m 622 console c 4 1mknod -m 622 tty0 c 4 0
serial number corresponds to 1.9600n8 (ttyS1, 9600 bits, no equality, 8 bits)
append = "console = ttyS1,9600"
S1: 23: respawn: / sbin / getty -L ttyS1 9600 vt100
Xfree86, svgalib, gpm, SVGATextMode
Updated
Are you tired of your computer running slow? Annoyed by frustrating error messages? ASR Pro is the solution for you! Our recommended tool will quickly diagnose and repair Windows issues while dramatically increasing system performance. So don't wait any longer, download ASR Pro today!
리눅스 커널 시리얼
Série Du Noyau Linux
Linux Kernel Serial
Seriale Del Kernel Linux
Linux Kernel Serial
Numer Seryjny Jądra Linux
Seriële Linux-kernel
Последовательный порт ядра Linux
Serie Del Kernel De Linux
Linux-Kernel-Seriell